Homlokrakodók

homlokrakodógép, CASE 521G

Case 521G

Max. teherbírás: Z-BAR 7790/ XR 6700/ XT 6350 kg Kanálméret…...

Tovább
homlokrakodó, CASE 621G

Case 621G

Max. teherbírás: Z-BAR 9400/ XR 7960/ XT 7730 kg Kanálméret…...

Tovább
CASE 721G - homlokrakodó

Case 721G

Max. teherbírás: Z-BAR 10990/ XR 9160/ XT 8540 kg Kanálméret…...

Tovább
CASE 821G - homlokrakodógép

Case 821G

Max. teherbírás: Z-BAR 12810/ XR 10370 kg Kanálméret 3.6 m³

Tovább
homlokrakodó - CASE 921G

Case 921G

Max. teherbírás: Z-BAR 15080/ XR 12150 kg Kanálméret 4.0 m³

Tovább

A Case homlokrakodók olyan nehézgépek, amelyeket különböző anyagok, például homok, kavics, föld vagy törmelék mozgatására, rakodására és szállítására használnak. Ezek a gépek elülső kanállal vagy villával felszereltek, amelyeket hidraulikus rendszer működtet, lehetővé téve a gyors és hatékony anyagmozgatást. Az emelő kanál mérete változhat attól függően, milyen munkára használják éppen. A kisebb, precíziós munkákhoz kicsi, míg a nagy tömegmozgatásra nagyobb kanál használata javasolt.

A hidraulikus rendszer biztosítja a kanál emelését, valamint billentését és mozgatását, ami precíz irányítást tesz lehetővé. A kezelő kényelméről modern kabinok gondoskodnak, melyek légkondicionálóval, ergonomikus ülésekkel és fejlett vezérlőrendszerekkel vannak felszerelve. Elsősorban különböző anyagok, például homok, kavics, föld rakodására és szállítására, tereprendezésre és bontási munkák során keletkezett törmelék eltávolítására használják, de kiválóan alkalmas hóeltakarításra, útkarbantartásra, közműépítési és karbantartási munkákra is.

Features

NEW TOUCHSCREEN DISPLAY

All functions at your fingertip

The new Touchscreen Display allows the operator to get the full control of all the machine functions and setting, with additional new features specifically designed to enhance the driver’s experience.

New features:

  • Digital Operator’s Manual
  • Electro-hydraulic controls adjustability settings
  • New Power Modes
  • Follow-me Home Lights improvements
  • Easy and intuitive navigation.
  • Touchscreen ‘Tap’ and ‘Scroll’ functions, similar to automotive display technology
  • New Configurable Buttons (Machine Settings)

Standard on all units.

NEW CONFIGURABLE BUTTONS

Immediately enter your favorite screens

Three configurable buttons are located close to the loader control (both joystick and multi-levers version). On each button you can easily configure your most frequently used screens and make them immediately appear on the display just pressing the associated button.

No more wasting time to find the right screen within plenty of menus. Only one touch and what you want is already there!

Standard on all units.

NEW INTEGRATED PAYLOAD

Keep your production under full control

The new G-Series Evolution wheel loaders offer today the new integrated payload scale, a powerful tool, based on CASE proprietary design, accessible in the new touchscreen monitor. By the new integrated payload scale, you can read and log every single bucketload. You can also optimize every job report by identifying it with a complete set of data (the job ticket) like, customer name, your company name and address, the truck ID, the truck target load and every other data necessary to provide full information for every ticket you will close during the day.

Data can be directly transmitted to your desk via telematics through the SiteWatch™ portal

The system is able to indicate if the last bucket is exceeding the target load previously set and, in this case, the “tip-off” mode can be activated, helping the operator to partially discharge the contents in the bucket until the target load is achieved, expediting the loading operation with no wasting time in re-adjusting the truck load before leaving the loading facility

  • More Productivity!
  • More Profitability!

Optional on request.

NEW PARALLEL LIFT FUNCTION

What about having 2 machines in 1?

Need more versatility from your machine? Does your project require a material handling and a loading equipment at the same time? The New G-Series Wheel Loaders provide a smart solution: just press a button on your keypad and a Z-Bar or XR linkage will behave as an XT linkage, thanks to the electro-hydraulic controls governed by a software able to perform angle compensation during the lifting operation. The fork shank or the bottom of the bucket will remain parallel to the ground from the lowest to the highest boom position with -3° / +7° angular tolerances.

Standard on all units.

NEW TIRE PRESSURE MONITORING SYSTEM (TPMS)

Optimize tires wear and extend their life.

Tires on a wheel loader are crucial to get the best performance from the machine. Keeping the tires pressure constantly under control allows to significantly extend the tire’s lifecycle, improve the overall machine reliability and reduce the operating costs. Now this is possible directly from the display on the New CASE G-Series Evolution Wheel Loaders.

More reliability!

Optional on request.

EXTENDED SERVICE INTERVALS

Save 20% on total maintenance costs!

The regular maintenance becomes even easier than before and much more economically convenient, thanks to the extended service intervals implemented on the CASE G-Series Evolution Wheel Loaders.

Increased machine uptime thanks to reduced stops for servicing.

More profitability!

MAINTENANCE ITEM
OLD SERVICE INTERVAL/ NEW SERVICE INTERVAL
Engine oil 500 hrs/ 1000 hrs
Engine fuel filter 500 hrs/ 1000 hrs
Engine oil filter 500 hrs/ 1000 hrs
Water Separator filter 500 hrs/ 1000 hrs
Radiator coolant 2000 hrs/ 6000 hrs
DEF tank vent filter 500 hrs/ 1000 hrs
STD Hydraulic oil 2000 hrs/ 4000 hrs
Cold weather oil 2000 hrs/ 3000 hrs
Hydraulic oil filter 1000 hrs/ 2000 hrs
Transmission oil 1500 hrs/ 2000 hrs
Transmission oil filter 1500 hrs/ 2000 hrs